Some problem

[ben44]

Dear,

I've some problem with the front.
I broke the part : 407 (the new one in kevlar) / 414 / 418.
During the last national french i brock all the part 4 time ...
I don't do some worth reception, but the track was very hard.
Did you find some solution?
During the A final i don't drive too speed because i've so afraid to brock the car a new time i did have some spare ...
I'm arrive to finish 2nd.

Ben

[Tbone]

Hello / salut Ben,

For me the new Kevlar front is to hard, so on a track with really big jumps etc I ike the run the last version of the plastic one ...

on the upper front I don't use the original screws but use longer one to give more hold on them ..
there is also a new alu piece from team C but to make that more.

so far
a bientôt
regards Tom

[ben44]

Ok, so i will use the old plastic one. But now i've a stock of kevlar part ... lol
I wait the new alu part, and I i've been used longer screw.

Regards / Merci

Ben

[Tbone]

Hy Ben,
no problem on most of the trcks the kevlar part is great but when you have a rough track with big (hard) jumps my experience is that the nose will break quite fast ...

don't forget to use some threatlock on your screw when using the alupart.

when other questions are there feel free to ask.

also per PM in french is no problem if the english is not so easy for you ...

kind regards
Tom

[ben44]

I'm not sure about the definition of
"don't forget to use some threatlock on your screw when using the alupart"

If you speak about locit blue for screw on alu part i never use it because if you brocke a ballstud you can't putt out the part brock on it.

I'm ride better in french, but it's a Uk forum
I've to learn my english because in French i'm a little alone with this famous car.

[Lancia]

mais non tun'es pas le seul avec cette voiture...

[Lancia]

Originally Posted by Tbone

Hy Ben,
no problem on most of the trcks the kevlar part is great but when you have a rough track with big (hard) jumps my experience is that the nose will break quite fast ...

don't forget to use some threatlock on your screw when using the alupart.

when other questions are there feel free to ask.

also per PM in french is no problem if the english is not so easy for you ...

kind regards
Tom

tu es tom, qui fait les 24h de luxembourg?

Si oui salut!
Moi c'est laurent le vainqueur des 2 premières avec Christophe.
Je tourne en team c en belgique.....mais chez nous les gens commencent a s'intérésser au produit.
De plus Ce We aux 12h de charleroi Rapael Robert et Miko Bouvier ont tourné sur un teamC... La voiture était une des plus rapide et fiable...CQFD
Bonne pub!