|
|
#1
|
||||
|
||||
![]()
hiya, had my buggy out today and all was well, i came home and charged batterys and all of a sudden it wont power on at all, have changed batterys still no joy, anyone have any ideas of is my esc had it?
![]() |
#2
|
||||
|
||||
![]()
check all soldered joints on connectors between esc and batterys, check the wire from the switch isnt broken/loose,
if the esc was running very hot during use something could have blown inside, if you have access to one a digital multimeter will help diagnose wether there is a problem with the circuitry somewhere, unfortunately if there is something wrong inside only thing to do is send it off too SMD for repair as they are a very complicated bit of kit |
#3
|
||||
|
||||
![]()
checked all that, something must of blown, first use to, cheers for reply.
|
#4
|
||||
|
||||
![]()
assuming its new from a shop, go on the SMD website and fill out warranty form and send it back,
they are very good customer service wise i have had a couple replaced and usually turned around within a week, my version 1 went wrong and the warranty replacement was a version 2 as dont think there is any version 1's left ![]() |
#5
|
||||
|
||||
![]()
Got it from America I i was on holiday, and smd wont repair when bought out of uk, thought it was good deal at the time turned out to bite me in the a#@#
|
#6
|
||||
|
||||
![]()
Before you give up on it just check if there is a smell of electrical burning. Also hardwire the switch it may be just that simple.
__________________
My feedback http://www.oople.com/forums/showthread.php?t=19395 |
![]() |
Thread Tools | |
Display Modes | |
|
|