NTC3 One Way ??

[andys]

Just bought a NTC3 front one way.

The part number is 1728 and it says on the packet 'HEAY DUTY FRONT ONE-WAY NTC3 ONLY'

Just a bit worried about the 'only' part, will this be ok the B44 ? I had a one way in my old BJ and I don't remember the packet for that having the 'only' bit in the description on the bag !

Ta.

[andy05]

The NTC3 one way is the only associated one you can use the others are to weak

[IceMike]

just lookin at it i dont see why it whouldnt fit. but the shimming looks diffferent. i think they have made a new one so that you cant shim it for the b44. the old one needs 6 shims this one only ones one either side. looks like they might be trying to make ppl spend more money by saying its only for a ntc3.

http://www.oople.com/forums/attachme...6&d=1200521192

that is for the same part number so try an see if it shims the same or if they have actually changed the part

[bigred5765]

ha hmm
what diffs and gearboxs are u using
O ya ntc3

[IceMike]

carl ya comfusin me. that last post i made had a link to a page that comes from the part 1728. but if ya go on the ae website an look at the page that comes wit the part now its different. with different shims.

http://aedownloads.com/downloads/ins...tc3one-way.pdf

see thats y its confusin

[sly]

i got a ntc3 oneway and fit great in my b44 with 5 shims on the bevel gear side 0 on the other, with no skipping or no excess noise.

[andys]

This one-way does appear to be a new model, there are 2 others, part no.3978 and 1705.
Has anyone installed this new one (1728) into a B44, looks like it only comes with a couple of shims from the posted pdf, I seem to remember putting a load of shims on the old one I had one one side as someone has posted here?