22 slipping diff problem

[migsy]

hi guys.

i'm starting to get a slippin diff in the 22. i ran it at my local lastnight, set the slipper to suit the track but the diff just wont stop slipping.
i was wondering due to not seeing them in the kit but does the diff need the extra rings like the cr uses or not

any advice would be appreciated.

cheers..Alan

[DCM]

From what me and Dave have learned, rebuild regular.... very regular....

[migsy]

will do mate, nice one for the advice.

[The Pookster]

You may have stripped the nut or the nut holder and so cant get enough tension into the spring.

After lots of diff issues I now have standard Losi rings and thrust bearing with ceramic diff balls and b4 nut, nut holder and screw. Lasts an age without needing a rebuild now and can be run fairly loose without slipping.

[slow bob]

get the ceramic diff balls and thrus balls then use an associated diff screw and nut then the diff will run and run .. this is what i did about 3 months ago and i have only re built the diff once just to check it, and it was perfect ....

hope this helps

[AfroP]

losi also do an aluminium diff nut optional part but it can be more expensive than the associated T-nut