B44 forward cab bodyshell?

[tellor]

Does anyone know what type of foward cab bodyshells fit the b44?

cheers

[bad man alty]

Check team associated site . 17quid I think. Be the man an get a clear one . Pimp ur own styles duke.

[mof]

Originally Posted by tellor

Does anyone know what type of foward cab bodyshells fit the b44?

cheers

If you cut the chassis a little bit to shape it like a b44.1, then all of them (Punisher, Finnisher, Bulldog)

[Col]

Originally Posted by tellor

Does anyone know what type of foward cab bodyshells fit the b44?

cheers

Ugly ones.

[nicVEGAchildJR]

Originally Posted by Col

Ugly ones.

By that you mean the best looking shells

[Col]

Originally Posted by nicVEGAchildJR

By that you mean the best looking shells

Nope...

[dbizzle5]

Do you definatley have to move the servo aswell as trim the chassis to make these shells fit or can you get away with leaving the servo where it is??

[MHeadling]

Yes you need to trim off the front corners of the chassis, the easiest way is to cut your under tray out and lay it over the chassis and mark your cut lines. Wear a mask as Carbon dust is not too good!!

The servo can stay in positon but you need a shorter link from servo to bell cranks from the B4 (ie no turnbuckle) then mount the servo horn one spline to the centre of the car and your good to go!