|
|
#1
|
||||
|
||||
![]()
hi i have just bought a b44 factory an plan to run on my 5.1 motor and woud like advice on if this is a good choice . if yes i want to no what to to put with it for optimum performance . please help
![]() |
#2
|
|||
|
|||
![]()
Hi,
Have you got a 5.5 turn motor, for you b44 and you looking for a speedo to go with it? If so what's your budget, and do you know if you've got a sensored motor? If your not sure, do you know what motor it is? Thanks Matt |
#3
|
||||
|
||||
![]()
I dont no. Me cars at work. Ill look in the morning and give you the details in full. Thanks mate
|
#4
|
||||
|
||||
![]()
hi mate . yes its a 5.5 turn 6000 kv ezrun . the speed thing currently attached is ezrun 60a sl . that mite be fine .i dont no. last race it was overheating a lot. budget dont matter. im a good saver upper pal. let me no what you think.ta
|
#5
|
||||
|
||||
![]()
That esc combo is only good for on road touring cars. Your overloading the esc using a 5.5t offroad you need a 8.5 turn motor for offroad or a better esc.
ESC Specifications ESC Model: EZRUN-60A-SL Dimensions: 31.5mm x 27.5mm x 24mm (The height of fan is not included) Net Weight: 32g (without wires) Continuous Current: 60A Burst Current: 380A Resistance: 0.0007 ohm BEC Output: 6V/1.5A Suitable Brushless Motor: On-road: =>5.5T, Off-road: =>8.5T (2 cells Lipo / 6 cells NiMH) On-road: =>8.5T, Off-road: =>13T (3 cells Lipo / 9 cells NiMH) Working Battery Types: 4 - 9 Cells (NiMh) / 2 - 3 Cells (Li-Po) Motor Type: Sensorless Brushless Motor User Programmable: Available Cable Type: 14 AWG (Battery and Motor) Cable Length: 100mm (Motor), 150mm (Battery), 220mm (Receiver) Recommend Model: RC Model 1/10 Car
__________________
My feedback http://www.oople.com/forums/showthread.php?t=19395 |
#6
|
||||
|
||||
![]()
thanx mate . so for optimum performance what products woud you reccomend as a package.
|
![]() |
Thread Tools | |
Display Modes | |
|
|