any one any good with the mamba max software ?

[andy_n]

just wondered if anyone was any good with the mamba max software as in
do you know if i can set the motor to be the same speed to be like a 19t brushed or 27t
cheers
if so could yu save it in ur settings and send me it
cheer

[josh_smaxx]

Make sure punch control is completely off and only around 10-20% drag brake. set voltage cutoff to no cutoff and start power to high, should run nice and smooth and very quick

out of interest, what motor is it? i have the 5700 combo and a spare ESC.

[andy_n]

its the 6900
very quick an approximation id say its doing about 40 mph real speed
i dunno what my gearings like
im running 87 spur 19t i think pinion thats in my b4 does that sound owt near
i need to slow it down lol
ill be running it in a tiny church hall thing ideally a good 27t so ye really slow

[josh_smaxx]

I cant think of how to turn it down through the speedo, i can only think of using end points on a transmitter sorry.

[andy_n]

yes iv just done that on my remote now that will probably be easier hehe
iv got it set at 60 out of 150 so
all it does really it lower the puch rate i think makes it abit more useable

[josh_smaxx]

Ye, also turn your throttle curve right down if you can, if not do it on the software.