|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
10-07-2011
|
|||
|
|||
Need opinions for brushless
Hey guys! I'm trying to debate on either getting a Novak mongoose or lrp mini vector? Any suggestions? Or suggestion on other motors? It's for my mini inferno.
|
|
#2
10-07-2011
|
||||
|
||||
|
most guys at our track are running the 10.5 and 13.5 black novak three 80 micro motors in their cars and have had no problems with them and damn are they rapid...
i have a silver 8.5 novak three 80 micro motor and ive not been so lucky as the yellow wire came unsoldered from the motor windings, soldered it on but it came off again, "damn you cheap solder" cant say anything about the vector sorry, nobody uses them at our track
|
|
#3
10-07-2011
|
|||
|
|||
|
Thank you I'll look into it. I have another question will I be able to run any of these motors with a mamba max pro? Only reason I ask is cuz I have a spare one.
|
|
#5
11-07-2011
|
||||
|
||||
|
go for ezrun 25a 12t combo if 2030 motor over heats then grab yourself an emax 380 motor 4980kv. As quite a few national micro racers switched from mongoose for ezrun more reliable don't over heat.
in my blaze i'm using ezrun 60A minus fan with mamba cm26 once mmp has sensor port can use with mongoose/lrp motors
__________________
308 hobbies DMS Racing Jespares Future world models Mantua models 
|
|
#6
11-07-2011
|
||||
|
||||
|
Ive ran both, but prefer the Ezrun with a turnigy motor,smooth power delivery ,run cool and dam good price imo
__________________
~Rick Evans~ ~LRP~shark st ft~lwb~ ~Carisma GT14B pro~ ~Schumacher KF2~ ~Schumacher Atom~ ~BSR Basher-RallyX~ ~Ascociated RC8.2e RallyX~ ~TeamC T8EV3 RallyX~ phat bodies worm-racing http://www.mendiprcraceway.co.uk
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
