RB5 antiroll bar?

[erkan]

Anyone got a pic or description on how/where to mount a rear antirollbar? i Cant find anything on it..

[RogerM]

Not sure what can be done .... I'll look at my car tomorrow and let you know if I work anything out.

May I ask why you want a rear ARB for the car?

[erkan]

im racing indoors with rubber tires on carpet, and in the sweepers it rolls to a point where it just start slipping and cant come up with annother solution.. since almost everyone else drives b4's with rollbars in the rear i though that was the way to go.
i just have the stock kit without any other springs or so either.. i thought the rollbars from the stallion would fit but ive looked a little on it and it seems its to narrow.

Next weekend im going to race on a carpet with very high traction too, seems like rollbars is the only way to go..

[RogerM]

I;ve run my RB5 on carpet with very high grip rubber tyres on and not felt the need for an anti roll bar .... in fact I've tried to promote general roll to help transfer weight across the diagonals to aid corner exit steering.

Post up your general set-up for carpet and I'll try to do the same .... sure we can work it out for you!!!

[erkan]

since i ran it first time indoors today i havnt had much time to test yet..

front,
shocks upper inner hole, outer on arms. 40wt serpent oil about 5mm downstops inside,
camber, about 2degrees and toe about 0
silver springs
upper arms, inner, inner hole
if i remember right i set the bulkhead to 25degrees kickup

back,
shocks outer, outer holes about 6-7mm downstop, 35wt serpent oil silver springs
upper arms middle, outer holes
stock B4 wing, clears between the rearwheels, lowest mouting

overall very low rideheight
and i think everything else is stock..
battery 6 cell front position

[erkan]

I just ordered new springs, light green, light yellow and dark yellow both front and rear.. just have to hope i get them before friday..