Going brushless on a budget

[jasjeet]

Im getting tired of replacing brushes, i think i replaced them about 10-15 runs ago on my Reedy MW 11t Triple Motor.
Im looking to go brushless but need some opinions on brands, i see a lot of rebadging and things so im getting confused on what to buy.

Ive got about £100 to spend on the Motor and ESC togethor. And then some cash for the Lipo.

What do you guys recommend? Xerun/Hobbywing/Speed paassion any good? What kind of Turn do i need to match my current 11t Triple?

Im running an Xray T2 008 Touring car.

[Craig W]

if you got 120 you can get yourself hobbywing xtreme stock 13.5t motor and program card package of http://www.racersinexile.org.uk/Brus...91_372229.aspx and use cherry 5 u get discount or your can get esc and program card from http://www.ghttp://www.giantcod.co.u...-p-405301.html and 1 of these 59 for speedo and 15 for program card

[jasjeet]

What about this?

http://cgi.ebay.co.uk/XERUN-6000KV-5...ht_5856wt_1135

Do i need programming card? Im quite happy using the LED thing, or can i not do certain things unless i have the Programming card?

[ch!3f]

Originally Posted by jasjeet

Im getting tired of replacing brushes, i think i replaced them about 10-15 runs ago on my Reedy MW 11t Triple Motor.
Im looking to go brushless but need some opinions on brands, i see a lot of rebadging and things so im getting confused on what to buy.

Ive got about £100 to spend on the Motor and ESC togethor. And then some cash for the Lipo.

What do you guys recommend? Xerun/Hobbywing/Speed paassion any good? What kind of Turn do i need to match my current 11t Triple?

Im running an Xray T2 008 Touring car.

it all depends if you are going to be running at brca meetings or just local clubs. i used to have a fusion exceed combo its sensored so nice and smooth fully adjust able but you dont get the program card with them you have to buy it seperate there easy to setup without 1 though.
there £89 from modelsport really good price for what they are.

[jasjeet]

Bashing with my neighbour =P I just want something that's reliable and a little faster than my current motor.

[bodgit]

if you want faster choose from the chart below. either match or pick a faster motor than your 11 turn its a bit old but it will give you an idea
KV/BL/Brushed turn equivilent...

Castle Creations CM36 brushless / brushed equivelent:
S7700 (7,700kV) = 6-turn
S6900 (6,900kV) = 8-turn
S5700 (5,700kV) = 10-turn
S4600 (4,600kV) = 16-turn

LRP Vector brushless / brushed equivelent:
X-11 3.0 (11,400kV) = 3-turn
X-11 3.5 (9,800kV) = 3-turn
X-11 4.0 (8,600kV) = 4-turn
X-11 4.5 (7,800kV) = 5-turn
X-11 5.5 (8,100kV) = 7-turn
X-11 6.5 (6,900kV) = 9-turn
X-11 7.5 (5,900kV) = 11-turn
X-11 13.5 (3,350kV) = stock 27-turn

Novak SS/EX/Velociti brushless / brushed equivelent:
3.5R (10,500kV) = 3-turn
4.5R (9,000kV) = 5-turn
5.5R (7,400kV) = 7-turn
6.5R (6,400kV) = 9-turn
7.5R (5,800kV) = 11-turn
8.5 / SS5800 (5,000kV) = 13-turn
10.5 / SS4300 (4,200kV) = 19-turn
13.5 (3,300kV) = stock 27-turn

Losi
◊ LOSB9400 3.5T 9120kv
◊ LOSB9401 4.5T 7140kv
◊ LOSB9402 6.5T 4880kv
◊ LOSB9403 8.5T 3640kv
◊ LOSB9404 10.5T 3080kv
◊ LOSB9405 13.5T 2360kv
◊ LOSB9406 17.5T 1820kv

[jasjeet]

http://www.modelsport.co.uk/fusion-e...products/34311

Any good? Im guessing better than the Xerun?

[damselfly]

Originally Posted by jasjeet

http://www.modelsport.co.uk/fusion-e...products/34311

Any good? Im guessing better than the Xerun?

I have the 10.5t version of this and swear by it.
It's geared up to death and doesn't even break a sweat.
A truly wonderful combo' with many programmable parameters and read only options.