|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
22-06-2011
|
||||
|
||||
my hyper 8 pro BL conversion
Started conversion late jan this year was in no big rush to complete so little by little got going
    conversion kit-- hobby pro/ansmann fusion battery tray Ezrun 150A Trackstar 2560kv Castle Creations 10A bec As theres a few threads on conversions picked up a tip or two which should make my conversion a breeze, being i'll be putting back to nitro never cut radio plate used some carbon had laying about for servo plate/ rx mount, i'll be making up a extended plate for diff housing so esc has good mount. Opted for twin tray as one tray with 4s hampers shell,. Motor mount been dremaled attack so can use larger pinions with motor mount reversed mounted on spacers so motor clears chassis   battery trays mounted  Had to find ideal location for esc which is at rear between battery trays, so grabbed a carbon fibre top plate had knocking around an cut off piece for mounting plate an make up spacers so too clear rear centre shaft.  mounting posts   
__________________
308 hobbies DMS Racing Jespares Future world models Mantua models 
|
|
#2
22-06-2011
|
||||
|
||||
|
trackstar motor arrived weekend so dropped it in some soldering an wire tiding to be done
soldered bullets an some wire tidying  Now need lipos & uncut shell then near enough complete just to find ideal gearing
__________________
308 hobbies DMS Racing Jespares Future world models Mantua models
Last edited by wreckers; 11-01-2012 at 04:57 PM. Reason: hosting site gone with my pics :/
|
|
#4
09-07-2011
|
||||
|
||||
|
batts arrived yesterday lunch time
so had to replace deans for 5.5mm bullets on esc, drop in rx an make up plate for aerial holder, an line up new rear wing. Being as weather turned out nice went over park with buggy an dog for testing session 1/4 tyre broke away from both rear rims within 30 secs just gonna reglue for now till get new glue in week & tape all four tyres. Well happy with end result of conversion    brief footage half thottle mostly http://www.youtube.com/watch?v=ki3Sp...layer_embedded
__________________
308 hobbies DMS Racing Jespares Future world models Mantua models
|
|
#6
18-07-2011
|
||||
|
||||
|
Quote:
Dimensions 139 x 46.9 x 23.2mmgot from future world models
__________________
308 hobbies DMS Racing Jespares Future world models Mantua models
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
