LRP SXX TC stuttering at low speed

[Whiskers]

I've just installed my LRP SXX TC with my 6.5t Losi motor. At slow speeds it sounds like it is cogging slightly or like the transmission is clunky. Anybody know what it could be? It has a new capacitor and the sensor lead is fine.

[Nick]

Originally Posted by Whiskers

I've just installed my LRP SXX TC with my 6.5t Losi motor. At slow speeds it sounds like it is cogging slightly or like the transmission is clunky. Anybody know what it could be? It has a new capacitor and the sensor lead is fine.

is it a version 2? if so they dont work with 40 meg ko radio

[Whiskers]

No it's a version 1 and I'm using a spectrum DX3S

[Sheepdog]

have you tried changing your sensor lead?

[Sheepdog]

Originally Posted by Whiskers

It has a new capacitor and the sensor lead is fine.

i only ask cos i had one that looked fine but was broken internally,
have you also checked the settings incase it has defaulted to a brushed setting

[Whiskers]

Originally Posted by Sheepdog

i only ask cos i had one that looked fine but was broken internally,
have you also checked the settings incase it has defaulted to a brushed setting

I've tried it without the sensor lead and the motor didn't turn at all so I doubt it is the sensor lead. Also it doesn't have a brushed setting.

[coleman758]

Have a chat with Martin (Tisher) He's been having some problems too, Sounds very similar. He seems to think its his motor thats on its way out.

Hes got an X12 5.5t, What motor are you running?

Are you sure its the ESC? have you not got another to test?

[stoff]

Originally Posted by Whiskers

I've tried it without the sensor lead and the motor didn't turn at all so I doubt it is the sensor lead. Also it doesn't have a brushed setting.

It won't work at all without the sensor lead, you need to have that installed!

Definitely replace your current sensor lead with a new one. Treat the sensor lead as a perishable item. They are only a few quid.

[Whiskers]

Originally Posted by stoff

It won't work at all without the sensor lead, you need to have that installed!

Definitely replace your current sensor lead with a new one. Treat the sensor lead as a perishable item. They are only a few quid.

The sensor lead was fine with the other speedo that I have replaced with the LRP. I tried it with and without the sensor lead to see if was the sensor lead causing the problem but it wasn't.

[daz]

Is this the speedo you bought off ebay for £40?

[tisher]

Josh I have been having problems with mine over the last few weeks.
my one starts juttering like mad after about 3to5mins of racing depending on how warm my motor is before I start but when mine dos it the esc s led lights flicker with the juttering I am putting it down to my x12 thurmalling as the colder it is before I start the longer it takes for the problem to show