New Project - 2WD!!

[coleman758]

Well ive not had a good project for a while.

So here we go...

I currently have 4WD's DEX410 & D4
I have enough spares to build 3 cars over.
So i'm looking to make something unique.

Its going to be a mish mash of parts with a few custom bits i think.

I'm going to base it on a carbon chassis, like the D4 with the lipos at the back side by side. And maybe keep the motor position of the D4. Hopefully running a Durango gear diff.

Well they are my first thought? Anyone think i should add anything?

[ben]

Originally Posted by coleman758

Well ive not had a good project for a while.

So here we go...

I currently have 4WD's DEX410 & D4
I have enough spares to build 3 cars over.
So i'm looking to make something unique.

Its going to be a mish mash of parts with a few custom bits i think.

I'm going to base it on a carbon chassis, like the D4 with the lipos at the back side by side. And maybe keep the motor position of the D4. Hopefully running a Durango gear diff.

Well they are my first thought? Anyone think i should add anything?

I dont think you should add anything. I would take the Gear diff out though.

Ben

[RogerM]

The car you describe is very similar to Atomic Carbons early 2wd prototypes and and the B44 based car that Dave Burton (RudeBits) runs ... both have been seen to work well.

I'm with Ben, loose the gear diff.

[coleman758]

Originally Posted by RogerM

The car you describe is very similar to Atomic Carbons early 2wd prototypes and and the B44 based car that Dave Burton (RudeBits) runs ... both have been seen to work well.

I'm with Ben, loose the gear diff.

Do you know where I could find any more info on these?
There will not be much change to the rear, more so the front.

[Si Coe]

Best front end solution is pretty much to graft one from a B4 onto it.

[coleman758]

Originally Posted by Si Coe

Best front end solution is pretty much to graft one from a B4 onto it.

The problem i can see is the B4 uses a kickup chassis.