|
|
#1
|
|||
|
|||
![]()
who's racing this week?
|
#2
|
||||
|
||||
![]()
not me, nationalising
![]()
__________________
CML DISTRIBUTION -SOUTHWESTRC -HPI - RUDEBITS - MR O FOAMS - LMR - ATOMIC CARBON -STARREGORSEHOLIDAYPARK - ICON RC
|
#3
|
||||
|
||||
![]()
ill be there chris definatley micro. maybe 4wd if not it will be 2wd. can some one tell me how to adjust my b44 sliper off its wheeling!!!!!
|
#4
|
||||
|
||||
![]()
I won't be there either!
Huw try this: To adjust the slipper, remove the body and insert a 2mm (or 5/64”) hex wrench through the center of the top deck (or through the bottom slot in the chassis). Then, grab both of the rear wheels and rotate forwards to tighten and backwards to loosen. As you spin the wheels, you’ll feel the motor click every ¼ of a wheel revolution. At the track, tighten or loosen the nut in 2 click increments until you hear only a faint slipping sound for 1-2 feet on takeoffs. Shamelessly stolen from the manual at: http://www.teamassociated.com/pdf/ca...-preflight.pdf |
#5
|
||||
|
||||
![]()
I'll be there, 2 or 4wd not sure yet
|
#6
|
||||
|
||||
![]()
Alisha and I will be there, 2WD.
Anybody got some blue/silver springs for Alisha's B4.1 ? Time to start sorting it out for her I think ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|