df03 brushless

[darryl]

mmm may have to get the old dark impact out, its been over 3 yrs since i last raced so things have bound to have changed, can any one tell me please if there is a brushless system for the df03, and any suggestions on gearing, still have a team orion 6.5 kicking around somewhere
many thanks
darryl

[DavidAMS]

hi there
hobbywing makes some good combos (motor,esc,program card)
ebay has good deals(beware of fake ones) or on the for sale section here you could pick up a used esc for a decent price.
Have you upgraded the shocks on your df03?
I changed mine to the TRF ones and its like night and day difference.
get some different pinions and play with the ratios, i run a 23 82 ratio or a 26 82 depending on the track etc.
check to see if the grease has not dried up in the diffs (after 3 years)
hope that helps!

[darryl]

thanks for the info ,much appreciated, i used to race it all the time, (brushed) as could never find a brushless speedo small enough to fit, hence why im asking, upgraded shocks with associated threaded ones, cvds all round and a one way in the front

[jmke]

http://stores.benl.ebay.be/RC-FANS88...=p4634.c0.m322

bought EZrun from this guy, it's the real deal (according to all the fake checks)
while I also ordered one from http://myworld.benl.ebay.be/demonerr...id=p4340.l2559 , turned out to be a fake, look at the box and manuals you can actually see they scanned the original and printed it again as there's a loss in resolution

both ezruns do their job fine, so far no difference. regarding DF03, you're running with slipper clutch?

[darryl]

yes running a slipper clutch too, ill have a look at the ez range cheers

[daz]

You making a comebach fella?