Tardis 22

[Northy]

We are finalising some last details on the Tardis 22 and wanted to gauge some interest on how many people would be interested in a kit from the first production run?



The kit will include:

CF chassis with moulded kick up.
Chassis side pods.
Lipo strap.
Brass posts.
Shims.


The price will be £145 + P&P for the first batch.


Just a note on the Lipo dimensions:

Lipo dimensions for the Tardis 22 chassis are 69mm long by 46.5mm wide per lipo, brca regs call for a maximum size of 69.5mm long by 47mm wide, so please be aware that if you have lipos which are right on the limit of the reg's it might be a tight fit.

Reedy 60c saddles fit but are a tight fit as they are 46.66mm wide, but using
2mm of brass under the lipos they are a lot easier to remove and also the car
handles even better with the brass weight.

Dimensions of BRCA lipos can be viewd by download the following list.

http://www.brca.org/sites/default/fi...0v1%20pdf1.pdf


Thanks,

G

[Wacker 2]

NOBODY BUY ONE... I'm beating all the 22's at my club at the minute with my AC CR2 and I fear that may not be the case if Dr Who drops his Tardis on the world! LOL

Only kiddin... I've seen the proto Tardis during its creation and it is a really nice looking piece of kit... I've seen Jonathon at AC race it and its a massive improvement over the original 22 in mid motor

Definitely future money well spent for anybody who is currently pulling their hair out with their TLR 22.

Mr Hinckley!

[slow bob]

put me down for one please .. who do i make payment to ??

[JACKOR33]

Do we call or email / pm to register interest for a kit?

dave

[dirk702]

No Body ? Will the original fit on this tardis kit ?

[Cooper]

Originally Posted by dirk702

No Body ? Will the original fit on this tardis kit ?