Speed Passion Stock Software when using Modified Motors

[markwilliamson2001]

On Speed Passions website, I have noticed recently that the team drivers setups have been using Stock Software, with modified motors.
The drivers are then going down a motor wind from the normal 7.5 in 2wd, and 5.5 in 4wd to 8.5, and 6.5 respectively!

I guess this stock software is ramping up the performance of the motors, or providing more top end, so they can have smoother acceleration further down rpm band, keeping the car easy to drive.

I tried updating to the stock software over the weekend on my GT 2.0 LPF, but it wouldn't let me, when using the LCD programmer, and my PC, stating my ESC would not support the Stock Software.

How are the team drivers getting this stock software onto their GT2.0 speedos, or does it only work GT2.0 Pro Speedo, or is there something else I am missing!?

Any help would be appreciated.

Cheers
Mark

[tyreman]

It is only supported on the pro, stock and ex 2.1 versions of the speedo

[mikeyscott]

Originally Posted by tyreman

It is only supported on the pro, stock and ex 2.1 versions of the speedo

I've installed the software with no issues on my LPF, wasn't keen on it so reverted back to 205 MOD

[markwilliamson2001]

Hi mikey, how did you manage to do this, and what version of the pc software did you use?
I had 1.32 on when I did it....

Thanks,
Mark

[RogerM]

I have the 528MOD software which has turbo timing etc. on my HobbyWing 60A ExRun which is basically the LPF (but cheaper) and it works a treat.

[markwilliamson2001]

Hi all,

Managed to do it, by using the 1.36 version of the PC software, and am running 422stock (with the supercharger settings) as per Cockgod