madrat.what motor should i use

[nigel63]

i bought a madrat to try 10th buggies for fun,it came with a 21t brushed motor and 3800nimh battery,its very slow and would be no good watsoever to race,it needs brushless and lipo i knoe,but what turn motor should i get to be on pace,8.5t? or lower.a hobbywing combo is reasonably priced,any thoughts and ideas to get it to go please.

[budgio]

An 8.5t will be on the pace.
Make sure you fit proper bearings first though.
http://www.rcbearings.co.uk/index.ph...roducts_id=590

[nigel63]

Originally Posted by budgio

An 8.5t will be on the pace.
Make sure you fit proper bearings first though.
http://www.rcbearings.co.uk/index.ph...roducts_id=590

its allready fitted with a bearing kit so thats a bonus,i ll see if i can find a 8.5t combo then. cheers

[deano261]

i have just put a 6.5t motor in it and it was 115 quid from roundabout toys and its incredible. im just waiting for the lipo to come

[damselfly]

Originally Posted by deano261

i have just put a 6.5t motor in it and it was 115 quid from roundabout toys and its incredible. im just waiting for the lipo to come

What did you buy?

[deano261]

a fusion exceed pro

[maseace]

hi if you have the money i would put in a trinity 8.5 motor an orca vritra pro spec mk11 esc with program card as this has turbo so you can push the motor to a 6.5ish when and if you every need too and a savox 1258 servo. RC Lazy did me a good deal of £250.00 for the whole lot. also about 100g under ther servo and about 20g by the bat this transformed my rat.