|
|||||||||||||||
|
|
|
#1
|
|||
|
|||
|
hey guys, sorry for this thread as i guess loads of people have done it before, but i need a brca legal sensored motor and esc. Not really sure on price, £150 or lower preferably, but if i need more then i can stretch. thanks for reading
|
|
#2
|
||||
|
||||
|
If that were my budget I would have a look at the orca stuff. Never ran them but heard good things. As you are new to the hobby I would say go 10.5 but certainly not less than 8.5.
__________________
Team Schumacher www.racing-cars.com Paint by www.customblitz.co.uk Feedback http://www.oople.com/forums/showthread.php?t=67178 |
|
#3
|
|||
|
|||
|
thanks, how competitive will a 10.5t motor be? some of the guys at my club are 6.5t and stuff like that. Althogh i have seen some guys doing better with a higher turn than lower
|
|
#4
|
||||
|
||||
|
Doesn't matter how fast your car is if you keep crashing. Honestly slower can be faster over 5 mins. Consistency is key not raw speed. It will be easier to be consistent with a 10.5.
__________________
Team Schumacher www.racing-cars.com Paint by www.customblitz.co.uk Feedback http://www.oople.com/forums/showthread.php?t=67178 |
|
#5
|
|||
|
|||
|
thanks again, do you know how many amps it should be? How much difference will there be between 60A and 100A
|
|
#6
|
|||
|
|||
|
what about this http://www.modelsport.co.uk/fusion-e...products/34310 ? is there a reason its so cheap, and is it brca legal? I'll look on the list
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|