NOSRAM MATRIX EVOLUTION 2007

[pb1]

Hi all have a question in have a new ( NOSRAM MATRIX EVOLUTION 2007 )

But i want to connect my new ko 2123 fet servo. But the speedo has no fet wire.

[ben]

All ya need to do is solder the fet wire on your servo to the posotive battery post on your speedo. Hope this helps

lil ben

[PaulRotheram]

Don't forget to attach a Choke diode between the two.

[ben]

woops forgot about that. Yeh i ran mine without one and it glitches a lot.

lil ben

[pb1]

Thanks for the advice

[gazbaz2]

Originally Posted by pb1

Hi all have a question in have a new ( NOSRAM MATRIX EVOLUTION 2007 )

But i want to connect my new ko 2123 fet servo. But the speedo has no fet wire.

Are you sure it hasnt got a blue wire, cos i have a evolution speedo and mine has 1

[bigred5765]

the man is right pete
unless its been snipped of
it might not be a 2007 evo

[James Stewart]

Hi Guys,

As has been posted above, the later Matrix Evo speedos do not have the FET wire on them - you can connect straight to the +ve battery connection on the speedo if required, although you'll still need to add the FET Choke like you normally would.

[ashleyb4]

I have the latest nosram amtrix evo 2007 edition and it has a fet wire i have to and they both have fet wires

A

[MattW]

Ashley - Trust me when i say that James knows what he's talking about when he talks about Nosram stuff - he has seem far more recent stuff than you have, i can assure you!!! Later 07 units from Nosram and LRP don't have the lead