|
|
#1
|
|||
|
|||
![]()
just got a question! can you charge lipos at the same time when there on a Y connector?? as if they where 4cell the same way you run them in the car??
![]() cheers guys |
#2
|
||||
|
||||
![]()
You can indeed charge 2 x 2s packs at the same time. Firstly they have to be wired in series, e.g, one live + and one negative - joined together and then the remaining + and - go to the charger leads. The only issue which can easily be overcome is the balance port issue as you have two plugs consisting of 3 wires.
You can either make a balance lead adapter, or join both packs together permanently and fitting a 4s balance plug. If you need a diagram on how to wire up either balance lead just ask and ill send you one across. Hope this helps. |
#3
|
|||
|
|||
![]()
thanks very much thats very helpful exactly what i wanted to no
![]() |
#4
|
||||
|
||||
![]()
Firstly, will you be joining the 2 packs together permanently and using just 1 balance connector, or will they be separated at times so an adapter lead would be better?
|
#5
|
||||
|
||||
![]()
A quick google scan brought up a nice diagram. You will need to purchase 2 x female 2s balance connector and 1 male 4s connector, then simply solder together and shrink.
The plugs can be found on ebay very cheaply. ![]() |
#6
|
|||
|
|||
![]()
thanks so much you saved me alot of problems
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|