b4.1 nut driver

[davidwickens]

what size nut driver do i need for my b4.1 front wheel lock nuts 5/40

[neiloliver]

The B4.1 does not have nuts on the front wheels, it has button head screws that accept a 1/16" hex driver.

B4 cars that do have a threaded axel fitted with nuts use a 1/4" nut driver but this is not the case for the B4.1.

[davidwickens]

thanks for thr reply but my b4.1 has locking nuts on the front size 5/40

[neiloliver]

If they are the plastic nuts (AS6222) then a 1/4" nut driver should fit.

Neil

[panch]

Neil,

My B4.1 FT came with nut front axles too not the screw in type, maybe this a change or the wrong parts bag ?

[neiloliver]

you two must have had the cheap version then