|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
15-04-2011
|
||||
|
||||
dropped a clanger
Hi,iv bought the HRC block and iv put all the shims and inserts in the same box as the LRC ones
 ...........there are some with 22t on them all,then some without,but there are 2 with 2deg but not 22t on,but one is thinker than the otherplease help a numpty head 
|
|
#2
15-04-2011
|
||||
|
||||
|
LRC shim will be thinner than the same HRC block, simples!
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
|
|
#3
15-04-2011
|
||||
|
||||
|
fffffffaaankkkkkkkkkssssssss
|
|
#4
15-04-2011
|
|||
|
|||
|
Lrc shims thinner. But lrc inserts thicker!!
__________________
proracing Moss Models Associated Reedy DJ KIRKY
|
|
#6
15-04-2011
|
|||
|
|||
|
No. Inserts are different to shims !!
The shims are the flat pieces of plastic The inserts are the plastic parts that fit in the front pivot block In the LRC kit The shims are thinner The inserts are thicker In the HRC kit The shims are thicker The inserts are thinner This is because the shim and the insert work together so that the pivot block can move up or down whilst maintaining gearbox at a standard height!! Hth
__________________
proracing Moss Models Associated Reedy DJ KIRKY
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Team Losi Racing
Hybrid Mode
