problems with my mad rat

[billyboy9002]

hi guys sorry to bother you all again, after the meeting today i stayed for a much needed practice,

after 10 mins or so the car just lost power to the wheels, i have had a look in the diff and it seems ok in there, no missing balls or flat bits and the gear has not broken either, built it all back up and seemed fine whilst holding it, then when i put it on the floor lots or motor noise and not much movement

i am stumped

any ideas?

cheers

[ben44]

Look if your motor is putt nice with the slipper and look if slipper is Ok

[billyboy9002]

they are both fine buddy

[nosequehacer]

[QUOTE=billyboy9002;485197

the car just lost power to the wheels[/QUOTE]

What do you exactly mean ? the motor turns high and freely but the wheels don´t turn? Is there a noise somwhere ? If EVERYTHING is fine, I will try like this: - other battery
- other motor
- other esc

[billyboy9002]

What do you exactly mean ? the motor turns high and freely but the wheels don´t turn? Is there a noise somwhere ? If EVERYTHING is fine, I will try like this: - other battery
- other motor
- other esc

the motor turns freely, and spins the spur, the wheels turn quickly whilst holding it but on the floor its like there is not enough torque/power to move the car

have tried a new battery still nothing

[nosequehacer]

No strange noise? wich motor turns/pinion/spur?

[billyboy9002]

bodgit As you say you have lots of motor noise but not much movement have you checked that the motor bolts have not come loose so that he pinion and spur dont mesh.

yeah i have, took it out and re built it back up

nosequehacer No strange noise? wich motor turns/pinion/spur?

no strange noise just the motor going round, am using a fusion 13.5 combo
with 80 spur and 28t pinion

[nosequehacer]

Another motor to try ?

[bodgit]

As you say you have lots of motor noise but not much movement have you checked that the motor bolts have not come loose so that he pinion and spur dont mesh.