|
|
#1
|
|||
|
|||
![]()
X4Pro sorry wrong title on the thread
just finished building my x4pro kit. now to my problem, when hitting the throttle the rear wheels dont spin properly, seems very very poor, they dont spin until full throttle and is weak. any ideas? Last edited by neo123; 24-03-2011 at 04:01 PM. Reason: wrong title |
#2
|
||||
|
||||
![]()
Sounds like the rear diff could be very loose or the drive shafts are binding. Do you have wheels on the car?
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#3
|
|||
|
|||
![]()
the diff is tight, tried to loosen it up, but still the same so i tightened it again, and yes, wheels are on. how do you mean by the driveshafts binding?
|
#4
|
||||
|
||||
![]()
They might get to a certain point and then "stick" this is binding. It can be caused if the wheels are on too tight as that crushes the bearings and causes them to bind.
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#5
|
||||
|
||||
![]()
How tight is the slipper?
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210 |
#6
|
|||
|
|||
![]()
3,5mm
like the manual said. but maybe loosen it a little? |
![]() |
Thread Tools | |
Display Modes | |
|
|