full size stick lipo in my mid motor tlr 22

[jampat2004]

as the title says ive done the impossible and manage to fit a full stick lipo in my new 22,a friend of mine susgested using the rear motor esc mount in the mid conversion.
with a bit of cutting and altering of this part this then allows you to fit the reciever on there and is close to the esc as this mounted on the motor plate all the electrics are in one spot as is the pt and esc switch,am very pleased with this as its turned out very neat.
the battery stil holds in with one velcro strap and can be removed in seconds.

[Aran]

click on reply and then go onto the advanced reply and at the button it should give you the option of adding and attachment.

hope this helps

[jampat2004]

Originally Posted by Aran

click on reply and then go onto the advanced reply and at the button it should give you the option of adding and attachment.

hope this helps

thanks pal pics now on

[PaulUpton]

Originally Posted by jampat2004

as the title says ive done the impossible and manage to fit a full stick lipo in my new 22,a friend of mine susgested using the rear motor esc mount in the mid conversion.
with a bit of cutting and altering of this part this then allows you to fit the reciever on there and is close to the esc as this mounted on the motor plate all the electrics are in one spot as is the pt and esc switch,am very pleased with this as its turned out very neat.
the battery stil holds in with one velcro strap and can be removed in seconds.

Have you added a extra gear to the rear mounted gearbox? As it will run backwards if you havent

[jameswilkinson7]

Originally Posted by PaulUpton

Have you added a extra gear to the rear mounted gearbox? As it will run backwards if you havent

He has used the mid motor gearbox

[Dudders]

ooooooooh now that's got my interest up!.

Thinking of a change but didnt want the extra cost of batteries etc etc.

[till]

I´ve nearly finishes my last night and since then I was thinking of the Layout too.
But I´d like to mount my esc on the chassis!!!
What about getting the bat "diagonal" in the car??
I think I´m going to try this. will see =) .... time to be creative !!

[treacle]

problem whith running batteries diagonal is you have different wait transfer it will have to mount sideways of normally to keep weight equal on all points of the car.