AE SC10 options?

[MHeadling]

Hi chaps, I have a SC10 on the way. It's kit STD and wondering what options to buy for it?

I have heard Rpm bumper is essential?

Any other good bits to get?

Shock set up would be good too

[Richard Lowe]

This is how I'm going to start with mine when I get chance to play with it properly...

http://www.teamassociated.com/pdf/ca...rnats_2010.pdf
(I know it doesn't say so on the setup sheet but the rear springs are silver and the rear shocks are on an extra drilled 4th inner hole on the tower)

All you need is a ball diff (std B4) and JConcepts Raptor and you've dialled

[MHeadling]

Thanks Rich, I take it I'll need the B4.1 balldiff as SC10 uses metric bearings?

I have a spare B4 ball diff so let me know how I can get it installed.

I'm thinking T4 CVDs too

[Richard Lowe]

Sorry yes you'll need the 4.1 diff outdrives unless you use the older gearbox case + bearings

[mark christopher]

i had the rtr version all i aded were Ft shocks and CVD's, along with an alloy front pin brace

i now have a FT, both got some hard hits and the bumpers were fine

[Sheepdog]

TBH they are pretty tough, the plastics flex really well, i planning to retro fit a set of losi shocks on mine tomorrow, easy to keep one set of springs between buggy n SCT along with some titanium turn buckles, RPM ball joints RadshapeRC do a quality chassis plate in a brushed alloy effect (well worth the money) just to protect the front end and an underbody if you outside
Mark ya might wanna have a look at tyres too, Kourse Kings work really well, hard wearing too, proving popular!! reasonable price too!