X2C Setups

[Tom3012]

Hi all, currently playing around with setups for this car, keeps getting better!!!

Heres what ive got so far...

Front:

Losi steering blocks (allows me to use losi wheels)
Front hub camberlink - inside hole
Front bulkhead camberlink - inside hole with 2mm washer underneath ballstud
Shock mounting - Inside hole on wishbones, middle hole on tower
Steering mount - Looking from the front, rear holes


Rear:

Hubs - Ansmann ally hubs 0degree, middle hole, 2mm under ballstud
Top camberlink hole on shock mount
Shock mounting - Outside hole on wishbones, Middle hole on tower
Wing - 7" Jconcepts mounted in the lower holes

Everything else...

Losi 6.5 with a Sphere 07, Kit spur on a 24 pinion
Lead sheet under lipos, 25g under servo
Big bore shocks, Schumacher 2.5 rear springs and 4.0 front... 30wt all round, drilled the shock pistons out too but cant quite remember, ill post up later...

Or, with losi shocks, Red pistons all round, 32.5wt losi oil front, 30wt losi oil rear, blue front and red rear springs...

Hope thats useful to someone!!

P.S, currently running indoor on carpet...

Any questions please ask and ill do my best to help

Regards, Tom

[ben44]

This is interesting because i run my 1st national race on carpet in 7 days.
Did you have the convertion on Ansmann bb or normal one.

Your carpet have hight gripp, normal or small?
If any other driver have a setup i'm interesting.

What is "Lead sheet under lipos"
Did you use other alum option on the front and rear, beacause i've putt them

[Robbiejuk]

I race on high grip carpet every week Ben so I will post my current set-up after tommorow night.

Looks like tom has a sheet of roofing lead underneath his batteries. A bit like the brass plates your friend red has made.

What tyres are you using tom?

[Tom3012]

Originally Posted by Robbiejuk

I race on high grip carpet every week Ben so I will post my current set-up after tommorow night.

Looks like tom has a sheet of roofing lead underneath his batteries. A bit like the brass plates your friend red has made.

What tyres are you using tom?

Correct, lead roof flashing, ill buy some brass at some point

Ive been using dboots for competitions but foams for club meetings to try n keep costs down...

Ben, sorry im not sure what you mean when you say 'did you have the conversion on ansmann bb or normal one' ?

Any more questions please just ask

[ConceptRacing]

Thats quite close to my indoor set up apart from the 2mm washers under the front bulkhead, good to see set ups fairly close to each other, just need to find one that works in the wet on astro now.

[Robbiejuk]

Originally Posted by ConceptRacing

Thats quite close to my indoor set up apart from the 2mm washers under the front bulkhead, good to see set ups fairly close to each other, just need to find one that works in the wet on astro now.

what are you struggleing with on wet astro eric? Front end or rear?

[Tom3012]

Originally Posted by ConceptRacing

Thats quite close to my indoor set up apart from the 2mm washers under the front bulkhead, good to see set ups fairly close to each other, just need to find one that works in the wet on astro now.

The 2mm is under the ball stud, helps take away the snatcy steering