Anyone own a Fusion exceed? Parameter help needed

[damselfly]

Hi Guys. I've got myself a fusion exceed 10.5 ESC, but need assistance on what to set some parameters to. Namely the " advanced timing " function and the " cut off voltage ".
I understand that a 2s Lipo should have a cutoff between 6-6.4V, but the manuals programming chart doesn't make loads of sense on these criteria. Do I use the (2) or (8) setting?
On my advanced timing function, I have the following options; 0' , 25' , /0 , and ~10.
What on Earth does this lot mean, and what should I set it to?
Many thanks for any feedback, in particular from those using this speed control.

[markymark6183]

Hi, I've got the same system and I'm a newbee so I haven't got a clue what to do at all with mine so any help would be great

[minke]

My parameters

1 motor type sensored (2)
2 battery type LiPo (1)
3 cutoff voltage Auto (1)
4 power curve Linear (2)
5 advance timing 0 (1)
6 acceleration Highest (5)
7 start power Normal (3)
8 reverse function Oneway (1)
9 reverse delay 0.2s (1)
10 neutral width normal (2)
11 motor direction normal (2)
12 speed mixing brake 0% (1)
13 abs off (1)
14 auto brake 30% (4)
15 min brake 40% (5)
16 max brake 100% (11)
17 reset

[damselfly]

I could do with using somebody's programming card if possible, as I find it a real pain navigating the system with the transmitters throttle movements.
If anybody would allow me to use theirs in their presence, or lend me one for a day i'd be happy to pay for the privilege.
It took me ages just to get the reverse function working. :-D
I'm in North Manchester, so would be willing to travel about 15 miles or so.

[minke]

I live in whitefield, will be racing at coney green, radcliffe on sunday if you wanna see

[Robbiejuk]

Looking at the instructions on the fusion website the flashes on the esc show the voltage the cut off is set to. The formula they give is (voltage - 2)x 2. So for a cut off voltage of 6 volts it is (6v - 2) * 2 = 8 flashes.

Auto mode for this would probably be recommend though which is just one flash.