B44 build and spares

[frogger]

I have a B44 on the way and I was wondering if there are any perticular build tips someone can share?

Also, has there been any common weak point identified so I know which spares I should be getting other than the usual (wishbones/diff gears/etc.)?

I'm from a Lazer ZX-5 background so have absultely no idea which other cars parts may fit so any advice appreciated

Would anything at all from the Lazer fit (ie. wheels, bearings or ...)?

[Oliv996]

Originally Posted by frogger

I have a B44 on the way and I was wondering if there are any perticular build tips someone can share?

I would let you know to take care of pins in each CVA. The ring outside is not enough to keep them in place. I would suggest you to grind a flat in the middle of pin

Olivier

[KyoshoK]

pretty much nothing carry over, other than the 2 motor screws.

u wil need all new hex drivers aswell.

[frogger]

Are there any advice to building the AE shocks especially regarding fitting travel limiters? Do people run travel limiters in these shocks for this car.

[ryan]

Copy the Jared Tebo setup on the AE website. A good starting point

[c0sie]

What do you class as a limiter??

[frogger]

O-rings inside the shock leg