Changing tyres

[Benjy1]

I would like to change my tyres without buying new inserts and wheels every time. Of course they are super glued and that's where the problem is. What do you guys do?

[David Church]

Originally Posted by Benjy1

I would like to change my tyres without buying new inserts and wheels every time. Of course they are super glued and that's where the problem is. What do you guys do?

I soak the whole wheel, tyre and insert in acetone. This dissolves the glue and I re use the wheel and insert.

[Benjy1]

Cool another question to this I drive indoors on carpet using yellow mini pins have you heard of using 2wd tyres on 4wd car at the front? What difference does it make?

[David Church]

Originally Posted by Benjy1

Cool another question to this I drive indoors on carpet using yellow mini pins have you heard of using 2wd tyres on 4wd car at the front? What difference does it make?

Yes I have heard of this being done.
The best thing to do is try it, you might like it, you might not like it.
I dont think there will be much of a difference on the mini pin tyre. I think there is more of a difference if you tried the mini spike.

[mark christopher]

Originally Posted by David Church

I soak the whole wheel, tyre and insert in acetone. This dissolves the glue and I re use the wheel and insert.

i find if you cut the main of the tyre off, remove the isnert you can get more wheels in your bucket and no inserts to dry!

[David Church]

Originally Posted by mark christopher

i find if you cut the main of the tyre off, remove the isnert you can get more wheels in your bucket and no inserts to dry!

Yes Mark, this does work better, but, and it's a big BUTT haha, I said butt, ok what was I saying, oh yes, it takes far more effort to do it that way! So I just dunk the whole wheel tyre and insert in, the foams are fine with a good rinsing.

[Apricot Slice]

Originally Posted by Benjy1

I would like to change my tyres without buying new inserts and wheels every time. Of course they are super glued and that's where the problem is. What do you guys do?

rough up the mating surfaces (wheel and tire) with some sand paper.
Put a bead of hot melt glue around the wheel and let cool (without fitting tire)
When cool, fit tire and pop in oven at approx 100c for 6 mins.
Hot glue melts and tire beds into place.

when tires are knackered just put back in oven and then you can pull the tire off.

down side is if missus catches you putting things like that in the oven.

works for me.

(ovens vary. hot glue can be hurty. be careful)
edit. some Tamiya wheels will melt

[bigred5765]

heat from over will temper the tires mate not a good idea,stick to simple super glue theres a reason everyone does it that way,90% most of us dont have a oven track side

[Apricot Slice]

Originally Posted by bigred5765

heat from over will temper the tires mate not a good idea,stick to simple super glue theres a reason everyone does it that way,90% most of us dont have a oven track side

I am sure you are right. I don't dispute it. Try roasting an old tire at 100c for an hour and see if you can tell the difference. I cant. Green will still be green etc.

It maybe a good method for those that dont have well ventilated places to play with acetone or have kids that could get their mitts on it.

[mark christopher]

Originally Posted by Apricot Slice

I am sure you are right. I don't dispute it. Try roasting an old tire at 100c for an hour and see if you can tell the difference. I cant. Green will still be green etc.

It maybe a good method for those that dont have well ventilated places to play with acetone or have kids that could get their mitts on it.

no it wont rubber changes it properties at that sort of temp.

[Apricot Slice]

Originally Posted by mark christopher

no it wont rubber changes it properties at that sort of temp.

If they are made from just natural rubber temperatures up to 100c should be ok.
Do you know what type of rubber tires are made out of?

[Chequered Flag Racing]

Originally Posted by mark christopher

no it wont rubber changes it properties at that sort of temp.

I know that now. Mine are very tacky so should be good for grip. When they came out of the oven I got little black pin heads all over my fingers

[Chequered Flag Racing]

Originally Posted by Apricot Slice

rough up the mating surfaces (wheel and tire) with some sand paper.
Put a bead of hot melt glue around the wheel and let cool (without fitting tire)
When cool, fit tire and pop in oven at approx 100c for 6 mins.
Hot glue melts and tire beds into place.

when tires are knackered just put back in oven and then you can pull the tire off.

down side is if missus catches you putting things like that in the oven.

works for me.

(ovens vary. hot glue can be hurty. be careful)
edit. some Tamiya wheels will melt

I don't do the oven bit on prepping but I do 'oven' them to remove the tyre.

This time I got it wrong though. Had a blonde moment. 200c for 20mins for some reason, instead of 150c and 10mins Just glad the smoke alarm didn't go off in the works mess room . Two extractor fans on, door open, window open etc

Looks like the tyres & inserts are OK though

http://s1100.photobucket.com/albums/...view=slideshow

[Swalls]

Originally Posted by Chequered Flag Racing

I don't do the oven bit on prepping but I do 'oven' them to remove the tyre.

This time I got it wrong though. Had a blonde moment. 200c for 20mins for some reason. Just glad the smoke alarm didn't go off in the works mess room . Two extractor fans on, door open, window open etc

http://s1100.photobucket.com/albums/...view=slideshow

Thats brilliant

[truggy lover]

Originally Posted by Chequered Flag Racing

I don't do the oven bit on prepping but I do 'oven' them to remove the tyre.

This time I got it wrong though. Had a blonde moment. 200c for 20mins for some reason, instead of 150c and 10mins Just glad the smoke alarm didn't go off in the works mess room . Two extractor fans on, door open, window open etc

Looks like the tyres & inserts are OK though

http://s1100.photobucket.com/albums/...view=slideshow

lmao thats not the worst i have done , i like to try new things lol so i wnet for the micro wave route trust me guys it dont work

[cr1tch]

from 2th my 12th days we used to put insulation tape on the rims then use evostick to glue the tiers works a treat!!!!! Also tried a smialar method on buggies a thin strip of tape where tire wall sits flush on the actual rim, them evo stick. To remove boil in a pan, use tonges to remove out of water,and use a tea towel to hold HOT tire and simply remove tire....................

[bigred5765]

wow all that messing around, all you need is super glue to stick em on and acetone to to remove them whts hard about that