|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
03-02-2011
|
||||
|
||||
Receiver cut out - BEC or HRS issue?
heres a strange one for you im having trouble resolving.
In my mardave i have the following: 2600mah 20C LiPo mTroniks Storm X ESC (from modelsport) HPI 20T Saturn motor Spektrum SR3000 HRS Receiver All seems to run ok, but when i steer anything near to track speed steering, the receiver cuts out. I've come to the conclusing that this must either be an issue with the BEC lead power from ESC to receiver, or the ESC doesnt like the HRS Spektrum. Personally i think its the BEC, but how to i get round this issue. The ESC is all pre soldered and closed, so i cant even add a power cap can i? Slightly miffed with this one now. Any ideas?
__________________
Stephen Smith Answer RC Team HB Racing | Team Orion | Xpert | Racing Experience 
|
|
#2
03-02-2011
|
||||
|
||||
|
Try plugging on of these into the receiver
http://www.jespares.com/nitro-models...yword=spektrum Should stop the voltage dropping so low that the receiver turns off and then has to rebind
__________________
Team Associated B44FT ~ LRP SXX TC Spec ~ LRP Vector X12 6.5t ~ Savox SC-1251MG ~ Spektrum DX3S Schumacher Cougar SV Pro ~ LRP Sphere TC Spec ~ Losi Xcelorin 6.5t ~ Savox SC-1257 ~ Spektrum SR3100 ~ Spektrum DX3S In progress: Team Durango DEX410 V1-V4 hybrid ~ DESC410V2 ~ DEX210
|
|
#4
03-02-2011
|
||||
|
||||
|
because your running a low votage to start with in a mardave at 4.8v the receiver needs a constant flow at the same current which fluctuates at lower currents when you esc its drawing power.putting in a power cap will solve your problem there cheaper to make tho rather then buying search 10v 4700uf on ebay and use an old servo plug to wire it up.
red to + black to - on the cap and in the red and black slots on the plug for the receiver and your sorted.just stick it in any spare socket
__________________
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
