Steering servo not centering

[Cardnim]

Hi folks,

I have just installed a Savox 1258G into my Schumacher Cat.
The tx is a Etronix Pulse 3ch 2.4Ghz (also new to me)

When I centre the servo and then steer, the steering returns to a random location. By that I mean that it seems to never return to centre, instead stopping a little from it.

Adjusting the trim can help until you turn the other way and then it goes off again!

Any thoughts or advice massively welcome.

Thanks.

Andrew

[ch!3f]

i have the same problem with my core rc code,i reset the tx which worked for about 10mins then it started doing it again.if you have bought it second had i recon thats why they sold it!

[Cardnim]

I have actually, I just bought it from an Oople member!
Shocked if they have swindled me

Could it be anything else?

[ch!3f]

dont know but id send it back n get my money back as it cant fix mine!

[mattJT]

Have you checked the servo saver/arm?

I had a similar problem with my mardave, knew there was nothing wrong with the TX, RX or servo as had come out of another car, following advice from fellow ooplers, turned out that the problem was the servo saver itself, as the wrong one was fitted.

[ch!3f]

i dont use a servo saver on mine and you can see when it returns to centre it stops early both ways.ive reset it messed with all the settings and nothing works luckily i can manage with it doing that with my buggy but not my m03 or f1 so im getting a futaba 3vc 2.4ghz which is on its way so when it comes my core is getting sold as faulty unless i find away to sort it.