|
|
#1
|
||||
|
||||
![]()
Does anybody know how to setup/programme this ESC please? It's the stock ESC that's found in the brushed rtr Mad rat.
Reverse takes about 4 seconds to kick in, and there the car doesn't brake. Thanks in advance for any help. Last edited by damselfly; 24-01-2011 at 02:10 AM. Reason: missing image |
#2
|
|||
|
|||
![]()
I have the same symptoms on my sons car plus it only seems to get about half the speed it used to. When the battery is connected press full speed on the transmitter then back to off then full reverse. This used to work but not any more??
|
#3
|
||||
|
||||
![]()
Is this the ESC that has no set-up button on the top? If so, you simply plug it in, go full throttle then full reverse on the transmitter and that's it. But if i remember right, you need to do this every time you switch it on.
|
#4
|
||||
|
||||
![]()
Hi Thomj; This one of mine has got a grey button on it, so I presume all stock Mad rat Sirius se esc's are the same.
|
#5
|
||||
|
||||
![]()
As the Ansmann ESC's are re-branded Mtronics ones id assume the manual and set-up sheet was the same. Here's a ink to an Mtronics manual http://www.mtroniks.net/resources/VI...ionsheet_2.pdf Hope his helps.
|
#6
|
||||
|
||||
![]()
Thomj; You're a star. The viper instructions worked perfectly. Cheers Sir. :-D
|
![]() |
Thread Tools | |
Display Modes | |
|
|