|
||
|
 |
|
||||||||||||||||||
|
|
|
#2
15-01-2011
|
||||
|
||||
depends if you want speed or acceleration. Personally 23T pinion is a good starting point
__________________
Durango DEX410 Tekin rs pro/x12 6.5T DEX210 with Tekin and 6.5T Schumacher Cougar sv2 pro Ansmann Mad Rat, Mad monkey, Macnum Tamiya FAV, Tamiya Hornet Tamiya Grasshopper, Tamiya Hotshot Ansmann X4SC, Ansmann X4SC pro 
|
|
#4
16-01-2011
|
||||
|
||||
 Well the combo turned up yesterday courtesy of Modelsport and straight away I was impressed with the packaging, nice foam insert with all the parts nicely laid out. Now as far as I know this is included in the Madrat RTR (?) but the controller doesn't fit into the chassis so for now it has to go on top of the battery retainer. The biggest gripe thought is the lack of set-up instructions, it comes with a program card but doesn't tell me how to use it, it doesn't tell me how to wire the motor correctly, the little cooling fan runs constantly and also what it does say in the small manual doesn't tie-up with what the controller does when I switch it on. It does work and brakes OK but I don't know if it is set-up at it's best, I'll pop and see Dave at TOP tomorrow to make sure it's all OK.
|
|
#5
16-01-2011
|
||||
|
||||
|
Your pics arent showing. Never had a macnum myself but there should be plenty of space to fit the esc. Try to post em again.
__________________
Durango DEX410 Tekin rs pro/x12 6.5T DEX210 with Tekin and 6.5T Schumacher Cougar sv2 pro Ansmann Mad Rat, Mad monkey, Macnum Tamiya FAV, Tamiya Hornet Tamiya Grasshopper, Tamiya Hotshot Ansmann X4SC, Ansmann X4SC pro
|
|
#6
16-01-2011
|
||||
|
||||
|
I tried again and there is about 0.5mm in it but I can just squeeze it in:
It is an interference fit, the capacitor lead is in the wrong place! I'm beginning to think this isn't the one that comes with the RTR. Last edited by soane; 16-01-2011 at 11:26 AM. Reason: Addional text
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Ansmann Racing
Hybrid Mode
