|
|
#1
|
|||
|
|||
![]()
Hi Guys
I’m now starting to put my B4.1 together and I have a little question regarding the aerial, I will be running the Futarba 3VCS with the 40Mhz high response receiver (part No R203HF) but the aerial wire is about twice the length of the aerial tube. So my question is can I trim it to length??? many thanks G |
#2
|
|||
|
|||
![]()
I had the same problem i have left mine the lenght it came and got some small wire heatshrink and used that to keep the aerial wire to the outside of the tube
|
#3
|
||||
|
||||
![]()
don't trim ,never ever trim the Ariel wire its a tuned length wrap it up near receiver.
__________________
Mattys the driver,my names carl
|
#4
|
||||
|
||||
![]()
What about 2.4ghz then?
__________________
Vega RB6 - Orion - Apex Models - JE Models - Cable ties
|
#5
|
|||
|
|||
![]()
You can't cut that either. The wire usually quite short anyway, although with my Futaba receivers they are quite long. Just coil it around an antenna tube and heatshrink over it.
|
#6
|
||||
|
||||
![]()
So why have I seen stubby ones then?
__________________
Vega RB6 - Orion - Apex Models - JE Models - Cable ties
|
![]() |
Thread Tools | |
Display Modes | |
|
|