Go Back   oOple.com Forums > Car Talk > Team Losi Racing

Reply
 
Thread Tools Display Modes
  #1  
Old 18-12-2010
Spencer Mulcahy's Avatar
Spencer Mulcahy Spencer Mulcahy is offline
Mad Member
 
Join Date: Feb 2006
Location: Rossendale
Posts: 1,305
Default Losi xcelorine probs

I have just installed my new Losi xcelorine 6.5 combo into my car and it will only go full power and brake. I have re set the radio to it changed profiles changed sensor wire I cant install onto the computer becausr of the driver problems can anybody help cheers.
Reply With Quote
  #2  
Old 18-12-2010
i4n's Avatar
i4n i4n is offline
Senior Member
 
Join Date: Jan 2008
Location: Deal, Kent
Posts: 708
Default

Mine have done this a couple of times in the past, I'm sorry to say this, but the the only way I've found to cure it it to plug it into the computer and just saving the info that the software detects from the speedo back to it.

You could try plugging the quick set card into and changing the amount of throttle limiting. That might kick it into working.
__________________
Dragon Paints
Reply With Quote
  #3  
Old 18-12-2010
Spencer Mulcahy's Avatar
Spencer Mulcahy Spencer Mulcahy is offline
Mad Member
 
Join Date: Feb 2006
Location: Rossendale
Posts: 1,305
Default

Thanks for the reply that hasn't worked going to have to find somone with a comp that will take the program. Come on Losi sort it out please.
Reply With Quote
  #4  
Old 18-12-2010
i4n's Avatar
i4n i4n is offline
Senior Member
 
Join Date: Jan 2008
Location: Deal, Kent
Posts: 708
Default

No worries mate. Just make sure you find a 32bit version of windows on the computer or the software won't work.

It might be worth checking when you've got it connected to a PC that you're running the latest firmware as I can't remember it happening to me since I upgraded both of mine.

If you go here http://www.losi.com/Support/XcelorinDownloads.aspx you can download the latest version (which for the sensored ESC is D010130.lsc). Make sure you get the correct one though as putting the sensorless firmware onto a sensored ESC will turn it into an expensive paperweight.

You can also get the latest version of the Setup software from that link too.
__________________
Dragon Paints
Reply With Quote
  #5  
Old 18-12-2010
Spencer Mulcahy's Avatar
Spencer Mulcahy Spencer Mulcahy is offline
Mad Member
 
Join Date: Feb 2006
Location: Rossendale
Posts: 1,305
Default

The version that it has installed onto the computer is version 3 so it must be one of the new units with the updates pre installed its a bit annoying as it is fresh out the box. I was going to run it by changing profiles and using setup card and not using the computer lets hope Losi sort out the problems with it, the one in my 2wd is fantastic and is one of the first ones. Thanks again for the help if anybody knows how to get to default factory settings without the comp let mr know.
Reply With Quote
  #6  
Old 19-12-2010
Spencer Mulcahy's Avatar
Spencer Mulcahy Spencer Mulcahy is offline
Mad Member
 
Join Date: Feb 2006
Location: Rossendale
Posts: 1,305
Default

Sorted now my dads computer has an old xp system on it working a treat now cheers for the help.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 11:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com