Where to buy-Pit Boards?

[jamiekerr14]

Hey Guys, was just wondering where is the best place to buy the plexiglass pit boards. Anyone willing to let me know, where you can get them from or the material/ and shops ect? thanks a lot

jamie K

[hammerhead]

here ya go http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

[jamiekerr14]

Originally Posted by hammerhead

here ya go http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

Oh brilliant thanks for that.. and I presume that's the dimensions.. most people get/use? Thanks for the reply

[hammerhead]

ye thats a pretty standard size for a board you might want to pm him and ask for a 800 by 500 @4mm thick

[jamiekerr14]

Ok great thanks a lot!

[blitzboy]

depends on what size you want buddy and weather you want a polished and bevelled edge too all mine are polished and bevelled and back with a 3mm white sheet too ,,,

[lewis666]

Originally Posted by hammerhead

here ya go http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

so to invade on this thread,

but can you airbrush this?

also can this be used as a set up board for 1/8th nitro?

many thanks

lewis

[jamiekerr14]

Spray the bottom then cover.. in nitro blocker.. or a film or something.. I would say

[hammerhead]

yep thats right i use pve glue nice n thin and 3 coats same as the paint

[lewis666]

Originally Posted by hammerhead

yep thats right i use pve glue nice n thin and 3 coats same as the paint

what sort of size board would be good for a 1/8 nitro buggy? 800x500mm seems abit big?

just had a measure of my losi 8ight and i think that 600x400mm seems big enough?

many thanks

lewis