|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
16-11-2010
|
||||
|
||||
Jus' startin' out...
Now finished and mounted..!!
Got some mask from JM and daubed it on this... deffo a work in progress, so keep checking back... Maybe not the usual 0ople shell... but you gotta start somewhere right!? and besides, only £17 for two posted...!   Have I got enough on yet..? 
__________________
Don't believe the hype... Think for yourself.. 
|
|
#2
16-11-2010
|
||||
|
||||
|
hard to tell from pics , i usually have between 4-6 coats on try cutting a small section somewere,in the waste part of the shell see how it feels
__________________
Mattys the driver,my names carl
|
|
#3
16-11-2010
|
||||
|
||||
|
yep, like carl says, test on a waste part of the shell. if there isn't any, use your fingernail or such to lift a bit in the window area. then just put a little bit of tape over it.
|
|
#4
16-11-2010
|
||||
|
||||
|
Cheers Carl... I got 4 coats on and have removed a bit as you suggested... it came away fine I think... How do you usually get it started when removing the LM..? The bit I took off was still a bit floppy/soft...
edit: Thanks Jon...
__________________
Don't believe the hype... Think for yourself..
Last edited by emtee; 16-11-2010 at 10:05 AM. Reason: Acknowledge JM's answer..
|
|
#5
16-11-2010
|
||||
|
||||
|
it is a flexible coating, it doesn't go hard/rigid like card or something
|
|
#6
16-11-2010
|
||||
|
||||
 Phew..! jus' cut the window frames and grilles out.. not a straight line in sight! this is gonna be a fiasco.. I'm now gonna have a cup of sweet tea 'n dry my palms out then have a lie down... now That was the most nerve-wracking thing I've done for a long time... you see them adrenaline junkies...? for a right rush they should try what I've jus' done...
__________________
Don't believe the hype... Think for yourself..
|
|
#7
16-11-2010
|
||||
|
||||
|
haha
off to a good start mate. carry on and we should see the end product by crimbo '11
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
