Mad rat/Xpro build help.

[Diwrnach]

Hi there, been chatting in the general area for awhile deciding what cars to get for my daughter and myself, plus motors/esc/batterys etc etc, and now really only have the following to figure out, and thought it sensible to ask in the Ansmann specific forum.

Basicaly I'm after help with tyre selection, I will be bashing with my daughter on concrete and grass mainly, but racing on fairly hard dirt/mud.

Also would like to know what oils/greese or anything else of that nature I will need to complete a Mad Rat and Xpro build.

And lastly what tools are recommended? I do have alot of tools around, but after reading some horror storys of breaking screws/allen keys etc figure I would buy the right tool for the job.

Other than those if there is anything else anyone can think of I should know, or anything I should buy feel free to share your wisdom.

Maybe a bearing set for the Mad Rat was one thing I thought about.

Both cars are being purchased from Jespares by the way, if it makes any difference

[Chris56]

Well done for choosing Ansmann

A bearing set on the Madrat is a must.

RE tyres, its probably worth checking with your club as they may have a control tyre for competiitions.

A decent set of hex drivers is worthwhile - the XTM ones are pretty good value

What Motor/ESC?Lipo combo have you gone for?

[kedal]

Hi,

For your car you'll need :

silicon (white) for ball and graphite (black) for thrustbearing grease for the diff building (brand : asso, losi, B-Fast)
shock oil, like the Losi one (35 front, 30 rear)
2mm hex tool

about tire, for bashing you can buy some long life/hard cheap tire, for racing, goose bump are very good on rear, for the front losi, JConcept groovy are good !

You really need bearing ball set for the mad rat, but aslo a good set of alloy shock, and the optionnal motor plate.

That's pretty all, good car out of the box.

[Diwrnach]

Thanks alot, as I said in the other post, this has to be the most friendly and helpfull forum I have had the good fortune to find.

As for the motor/ESC I think I will go with this set up http://www.modelsport.co.uk/?CallFun...n&ItemID=30214.

I'll grab those bits for the mad rat, actualy thinking wether it would be better to order two xpros instead, as I assume that kit comes with those already?

[Diwrnach]

Sorry missed the lipo question.

Was advised to go with Intellect 7.4v 3800mah 35c lipo race pack off ebay.

[Chris56]

Good choice of kit. If you are buying a discounted bundle from JE Spares, these batteries might also be worth a look:

http://www.jespares.com/electric-mod...tegory_id=1168

RE the upgrades on the Madrat, if its just for bashing I would personally not bother with the alloy shocks/motor plate. If its your daughters intention to race however, it would be cheaper to buy an Xpro than to buy a Madrat and upgrade it (the alloy shocks are excellent but not cheap).

[Diwrnach]

Oh thats a nice looking battery, think I'll give them a ring in the morning and hopefully I can change my order and they havnt dispatched yet.

My daughter likely wont be racing just yet, she is only 3 1/2, but I will be taking her to the track on off days to see how she does.