|
|
#1
|
||||
|
||||
![]()
as above , what 13.5t motor would you recomened .
I think my old novak ss motor is getting a bit tired , it doesnt seem to have much braking power as well now too , ive been told that if the magnetic force is low it will cause a lack of high speed braking ( something that was one of my problems at newbury ) .. ive been thinking of either .. gm 13.5t sp v.3 trinity ea duo 3 ( due soon ) i was after one ready for chippenham ( just over 2 weeks to go ) , but was after maybe another for a spare , so thats why i didnt include a novak ballistic ! ( an extra £25 on the others ) it will be going in a photon with a sp esc with turbo software ... |
#2
|
||||
|
||||
![]()
Makes sense to match the SP motor with the SP speedo. Same combo I use. No lack of power.
|
#3
|
|||
|
|||
![]()
I've ran quite a few 13.5's, i've found the best have been the Tekin and the Nosram Pure/LRP X12. The Speed Passion V3.0 aren't bad motors either, was enough to beat you at newbury on sunday
![]() Matt |
#4
|
||||
|
||||
![]()
cheers guys
![]() soo far to be honest its a close race between the sp and a gm ( i originaly wanted a tekin , but have been told they seem to get hot ![]() yeah matt , on sunday it was a complete nightmare ( ive never made a d-final ![]() you name the problems , i had em ![]() ![]() but keep the motor suggestions coming !! ![]() |
#5
|
|||
|
|||
![]()
GM motor with the 1600gauss rotor will give you excellent breaking.
|
#6
|
||||
|
||||
![]()
thanks for your help ..
whats the main difference between the 1600 gauss or the 1300 gauss , is there a major difference in top end if running the 1300 gauss .. ive sorted my brake issue ![]() ![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|