|
|||||||||||||||
|
|
|
#1
|
||||
|
||||
|
Anyone have a good setup for Worksop or know Neil Craggs setup he used last time he went?
Ta |
|
#2
|
||||
|
||||
|
You could try this as starting point:
Tyres: Schumey Yellow Minipins, Snee Blue Foam Front: 35wt Oil No. 2 Piston Blue Spring Middle on Tower Inner on Arm 30 Deg Caster (Stock) Camber Link - Car = Inner (1 washer), Hub = Inner Camber: -0.5 deg Std Ackerman Trailing Axles Rear: 30wt Oil No. 1 Piston Silver Spring Middle on Tower Inner on Arm Std Toe In, 1 deg antisquat Camber Link - Car = Inner, Hub = Middle Medium Wheelbase Camber: -1 deg Tuning: More Steering, reduce front oil to 30wt, then try inline axles (if you have them) Less Steering, Run Front Camber Link Longest More Rear Traction on Power: change to Short Wheelbase More general traction/smoother: change to Inner Hole On Tower Less Grip in Middle of the corner: Try 2 Deg Antisquat. HTH Mark |
|
#3
|
||||
|
||||
|
do as marks set up if you find you need a little more steering just drop to silver front springs should be ok
__________________
Mattys the driver,my names carl
|
|
#4
|
||||
|
||||
|
One thing though - stock front castor is 25degree isnt it? the optional blocks give either 30 or 20 depending on which set you buy, but personally I always used 25 when I had a B4 and im now still 25 with the X-6.
|
|
#5
|
||||
|
||||
|
we running 30 on the x6 now chris, the cars is less twitchy and more balanced, plus you get more steering out of the corner,and more on power
__________________
Mattys the driver,my names carl
|
|
#6
|
||||
|
||||
|
Quote:
|
|
#7
|
||||
|
||||
|
Quote:
A
__________________
Ashley Williams I always thought by 2013 we would have flying cars, but we have got blankets with sleeves! |
![]() |
| Thread Tools | |
| Display Modes | |
|
|