Mardave & 1s LiPo

[Chequered Flag Racing]

what sort of rollout (pinion/spur) when using 1s lipo compared to 4 cell should I use?

[stegger]

I'd be interested in this also, what brushless speedo and motor are you using mate or are you going old school ?

[Mr Eccleston]

We are finding using the Mardave brushless system that id we use 80% of full power for 4 cell, and 100% for 1S lipo, they are as close as you will get.

Try and find out what the guys from Ardent are running performance wise, as they are usin 13.5 with 1S, seems to be a popular mix that we will hopefully incorporate into the Mardave National Series next year.

[stegger]

Are they running a seperate battery or a battery eliminator for the receiver with the mardave speedo ?

[Conrad]

Originally Posted by Mr Eccleston

Try and find out what the guys from Ardent are running performance wise, as they are usin 13.5 with 1S, seems to be a popular mix that we will hopefully incorporate into the Mardave National Series next year.

13.5t on a 0' timing speedo is quicker than the yokomo 23t motor we've used in previous years in the Scottish Carpet Champs, add a boosted speedo in to the mix and things just get silly. Sadly there were no mardave brushless systems to compare it against the week I tried this setup but I don't think there would be a huge difference apart from the 13.5t would allow you to run a sensored speedo which is a big plus in my book.

[stox217]

For a 13.5 on 1s lipo i would start with 18/46 for around ardent and hinckley.
(Gm 13.5 + lrp sphere original)
Now i have a tekin rs in it and now using 16/48

[simond001]

The new hobby wing speedo is probably the best solution at the moment. http://www.pit-bitz.com/product_info...roducts_id=744 doesnt need a life batter or booster and can be programmed and software updated.

Out of stock almost countrywide but back in stock Tuesday!

[Chequered Flag Racing]

Originally Posted by Chequered Flag Racing

what sort of rollout (pinion/spur) when using 1s lipo compared to 4 cell should I use?

I should have said this would be with G2 silver can motor not brushless running at TRCC's new venue

http://www.youtube.com/watch?v=_MsSaQ9hKW4

[stox217]

If it's with the new g2 4slot motors i would sat a 15/50 to start off with on a new set of rear tyres

Where is this venue at Glenn?

[Chequered Flag Racing]

Originally Posted by stox217

If it's with the new g2 4slot motors i would sat a 15/50 to start off with on a new set of rear tyres

is that with LiPo?

Originally Posted by stox217

If
Where is this venue at Glenn?

http://www.rccarclub.co.uk/

[Chequered Flag Racing]

Originally Posted by stox217

If it's with the new g2 4slot motors i would sat a 15/50 to start off with on a new set of rear tyres

is that on untrued tyres or trued as both could be new