|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
27-08-2007
|
||||
|
||||
lrp speedo and novak motor
As it says above i have a novak motor and an lrp speedo, and would like to know if they are compatible and would normally work together. As i have just tried them out and they dont seem to be working. I get power and everything but the motor doesn't seem to want to work. So if anybody has any ideas then it would be greatly appreaciated.
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
|
#2
27-08-2007
|
||||
|
||||
|
They should work fine.
G
__________________
Graham North http://www.atomic-carbon.co.uk https://www.facebook.com/atomiccarbon https://www.facebook.com/nortechracing 
|
|
#3
27-08-2007
|
||||
|
||||
|
Well beacause it didnt work, i realised it was still in the brushed setup so i tried the brushed motor and it worked fine. But when i tried to change the mode i wasn't able to get into the setup. So when i hold down the mode button, no matter how long i hold it down it still doesnt work. I think it may be the battery pack being a little low on power so i will try it when it is charged.
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
|
#4
27-08-2007
|
||||
|
||||
|
lrp speedo brushless and novak motor works fine
__________________
Mattys the driver,my names carl
|
|
#5
27-08-2007
|
||||
|
||||
|
But in that case something must be wrong with my speedo because it will work fine with a brushed motor, but it just wont let me change the mode to run a brushless motor. I will have another look, but if it still doesnt work then i may have to take it back to the shop so he can send it off to get it looked at.
 But the last time i sent one off, it cost me 100 pounds to replace it.  so hopefully they will be able to sort it out, with minimal costs.
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
|
#6
27-08-2007
|
||||
|
||||
|
There must be a fault with either the motor or the speedo (or the wiring?).
I run an LRP Sphere TC and a novak 4.5.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
