|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
22-08-2007
|
||||
|
||||
pins stuck in rear wheel hub
i took my buggy on the beach at blackpool about 6 month ago (pretty silly i dea i know), i cleaned it all but i think the pins have rusted in the rear wheel hub, and they dont push out. theyre stuck in there pretty tight, ive loosed the small screw and all but there jammed. any help
__________________
 [img=http://img32.imageshack.us/img32/4506/userbartemp.jpg] "mardaves are the future of sport electric!" "yea, if youve only got 30 pound to spend..." 
|
|
#2
22-08-2007
|
||||
|
||||
|
lots of wd40, brute force then get new ones.. maybe even snap the top off and use the right size nail punch and punch it through.
|
|
#3
22-08-2007
|
||||
|
||||
|
As Paul said, WD40 and lots of brute force. The same thing happened to me sort of, well it was stuck in ridiculousley tight anyway. But i ended up using a vice, a hammer, and a blunt object of some description. Then once it was half-way out i use the vice to hold the pin, then I got another vice to hold the rest. Then i gave it a few good old wacks with another blunt object and that seemed to dot he trick.
__________________
B4 5.5 L4 19T RC18t Mamba 9200Kv
|
|
#5
22-08-2007
|
||||
|
||||
|
maybe a bit of heat too, always helps.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
|
|
#6
22-08-2007
|
||||
|
||||
|
hit ittttt
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
