|
||
|
 |
|
||||||||||||||||||
|
|
|
#1
26-07-2010
|
||||
|
||||
trf201 setup help
Hi chaps, I seem to have an issue on my car which I need sorting.
Basically I got way to much initial steering and not enough exit steering. Help guys?
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man! 
|
|
#2
26-07-2010
|
||||
|
||||
|
Give us a clue what your running and I'll help ya out
__________________
Tamiya ~ Mugen Seiki ~ Viper RC ~ Pro-Line ~ Xpert Servos ~ BEAT ~ Protek RC ~ Amain Hobbies ~ LMR ~ Ultimate Racing ~ Nitrolux ~ Nibbo Designs ~ Stickit1 Racing ~ The World Famous TFR! 
|
|
#3
26-07-2010
|
||||
|
||||
|
35wt all round currently
kit pistons kit springs mostly kit settings front shocks out on the wishbone, in one from kit on the tower eaxtra anti-squat minispikes all round, outside removed on front 20g weight on servo about 60g under battery
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
|
|
#4
27-07-2010
|
||||
|
||||
|
Best bet is to put my setup on from southport.....this will get you in the right ball park then go from there, asuming your racing on astra? the kit springs will not be hard enough..
__________________
Tamiya ~ Mugen Seiki ~ Viper RC ~ Pro-Line ~ Xpert Servos ~ BEAT ~ Protek RC ~ Amain Hobbies ~ LMR ~ Ultimate Racing ~ Nitrolux ~ Nibbo Designs ~ Stickit1 Racing ~ The World Famous TFR!
|
|
#5
27-07-2010
|
||||
|
||||
|
I was thinking the kit springs were to soft.
__________________
dragon paints : team tekin : fusion hobbies :SCHUMACHER RACING : Nuclear R/C for all my sticky and slippery stuff - if it needs gluing or lubing, Nuclear RC is the man!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Tamiya
Hybrid Mode
