Speed Passion LPV v2.0/Hobbywing Xerun Questions

[Andysan]

Hi folks,

Am looking at getting one of the Hobbywing ESC's as directed by a mate to try and give me a bit more pace. As I understand it, this ESC and accompanying programming module are the same as the Speed Passion ESC and its accompanying programming box.

Basically, is there any reason not to order this that anyone knows of? Only thing that concerns me is that I cant find any firmware for it on the Hobbywing site, only beta firmware via Rapidshare links on forums which is a bit off putting.

Any info or reasssurance I can get on these ESCs relating to the proudct or after-sales support would be great please. Oh, and do the wires come pre-soldered as in the pic?

Cheers!

[losi madness]

there dam good sytem i use the 1/8 sytem and you need to put the bullets, on the esc and motor . the software is on the cd you get with them and the card reader and the black box that comes with them. all software is on the cd card reader etc . there dam good better than the new mamba monster lol

[Andysan]

Originally Posted by losi madness

there dam good sytem i use the 1/8 sytem and you need to put the bullets, on the esc and motor . the software is on the cd you get with them and the card reader and the black box that comes with them. all software is on the cd card reader etc . there dam good better than the new mamba monster lol

Thanks Losi Madness, is this definitely the same as the SP please, and do you mean i have to solder the bullets on for the battery end or the bullets shown at the pcb end? Do I need to do any soldering at the ESC end or are the wires all attached to the ESC as shown?

Thanks!

[losi madness]

by the look of it take a look at the 120amps one there better as well send me a link to the listing.

wire from the esc need bullets putting on them a\nd the battery connector putting on

[Andysan]

Originally Posted by losi madness

there dam good sytem i use the 1/8 sytem and you need to put the bullets, on the esc and motor . the software is on the cd you get with them and the card reader and the black box that comes with them. all software is on the cd card reader etc . there dam good better than the new mamba monster lol

Cheers, the listing is here:

http://cgi.ebay.co.uk/HOBBYWING-XERU...item3f00b89d24

And the programming box here:

http://cgi.ebay.co.uk/HOBBYWING-RC-2...item3f00ca8ee6

And the model that is supposedly the same as is here:

http://cgi.ebay.co.uk/SPEXT98802LPB-...item2a08254aed

Essentially, the few things I'm just trying to confirm before I buy are:

1. That the ESC is the same as the Speed Passion one.
2. The programming box is the right one (certain it is but there arent any product numbers mentioned anywhere linking the two).
3. Wires are pre-soldered to the ESC.
4. Any info regarding support or where upgraded firmware can be found.

Only running 13.5T so dont think the 120A one is necessary, and its quite a bit more expensive too. This shouyld be a lot better than my NOSRAM Evolution 2007 for 13.5T I hope!

[losi madness]

yes that the right 2 items you need mate . but there not the same esc lol there just rebaged and sold as ezrun they all come from the same warehouse but sold to different companies . but speed passion esc about the same spec but better more amps etc order 1 . i want a 1/8 as well . its the shipping fees etc

[Andysan]

Okey doke, so the only real difference is the amps as they are just the same product rebadged? Sounds OK to me, cheers for your help!

[losi madness]

I am using a 1/8 sensorless know cogging what so ever there good lol and sensorless does cogg like mad but these are dam good and know cogging what so ever that with out a sensor lead

[Andysan]

Cool stuff, and pretty racey too with the timing advance/turbo and all? Thx!