Slipper Clutch

[Jamie B4]

Got slight issue - tried some DMS spur gears and can not get them to stop slipping - tried locking them up tight to no success. Is there anything I can try to get these to work.

Also a few X6 drivers seem to have issues with their slippers - can you let me know what is the best combo - losi/asc/dms ??

Had a look at one on weekend that ran asc spur and slipper / dms plates and losi rest.

Please help??

[Darren Boyle]

Hi Jamie, the DMS spurs should not affect how your slipper works in any way, but be sure to check that your pads have not worn out and that the slipper plates are then running on the gear itself.

Most of the team now use the X-Factory slipper plates (which are flat - unlike several of the AE ones we have found), with the std AE spring and normal 5-40 nut, They all now use the DMS spurs (in varying sizes) along with standard AE slipper pads (make sure that these have "clicked" fully into place and are flat before you assemble on to the car)

Check these few things and let us know if you have any further troubles.....

[Squintz Palladoris]

The only problems I have had with the slipper was on the truck, using the AE White pads. The XF Plates help a lot. On the buggy I have never needed more than the AE slipper spring but the truck being heavier needs more spring with the newer white pads. The silver spring from the old losi Hydra kit works nicely. Also, after every few runs you can clean the pads up with a green scotch-brite pad or fine grit sandpaper.
If you can find a set of the old brown slipper pads they work much better. Unfortunately they are the same stock number as the new version so not so easy to find. AE is suppose to release a new compound soon that will be similar if not the same as the old compound.

DMS spur gears are great, I won't run anything else now that I have gotten my hands on them.

Brad

[super__dan]

I concur on the Losi Hydra spring, though this seemingly is very much personal taste.

[Jamie B4]

Darren/Dan etc

Thanks for the info.

I have indeed clicked a brand new set of asc white slipper pads into the recess on the spur. After speaking to Mat Dodd on sunday he said that he tends to run a new spur very tight for a few races as if it slips any it glazes the pads. I also heard that the dms spurs slip then get hot and causes problems. Still not sure what the ideal combo is as I also know that asc team drivers have problems with the pads.

Still after help

[matdodd]

Jay come and see me on Fri/Sat and ill have a look for you I ran a losi slipper last year plates, pads, spur and silver spring which worked well most of the time but I now run Xfactory plates, AE pads and Dms spur with the the AE spring but I always put a washer between the nut and the spring!
Mat

[Squintz Palladoris]

Originally Posted by super__dan

I concur on the Losi Hydra spring, though this seemingly is very much personal taste.

Seems to have a better(Wider) adjustment in my opinion.

Brad

[Jamie B4]

Thanks for the help - will try and sort it but might take you up on your offer Matt