conectors

[ianhaye]

hello rite i have had some more batterys come today, but i want to get all my batterys and chargers and esc's all matching conectors, i dont like deans, i have enough ec3 conectors to do it all in my box but im not sure if they will be man enough to do the job, they are the same as the losi conectors, the most i am going to be pulling is for a 6900kv brushless with 5200 30-40c 2s lipos, has any one used these before or should i bin them and order new set of conectors? any help be great thanks

[Whiskers]

Wahts up with deans? They work great!

[ianhaye]

have found them to be a pain to disconect some times, i am running the mamba max pro with a 6900kv motor but cant seem to find any info on what ampage it will pull

[paulc]

Deans or Corally plugs are the most popular

Paul

[ch!3f]

deans or corally defo i use deans ive found that when soldering them if you heat them to long thats when you get your problems with them.u want a good hot soldering iron and try not to heat them too long.

[ianhaye]

i know there are better etc but i just want to know if the ec3 will be able to cope, not witch are better please, as i have these to hand and can get them all done in time for next meet but if they ant up to the job then i wont use them and order some more bullets thanks guys

[ianhaye]

i just want to know if i can use them guys or will they get to hot and melt the plastic casing and arc out my new lipos? not witch are better thanks

[stox217]

use deans for soldering the male end keep the female in (unsoldered one) so if it moves then it wont move it too much