Go Back   oOple.com Forums > Car Talk > X-Factory

Reply
 
Thread Tools Display Modes
  #1  
Old 25-04-2010
chris68nufc chris68nufc is offline
Mad Member
 
Join Date: Nov 2006
Location: Newcastle
Posts: 1,870
Default Rear shock tower X6 Sq.

. How much? What do people use if they break? £24.00 for a shock tower
__________________
Chris Stewart
Team XRAY
Xb4 2018
Xb2 CE
Www.tqmodels.co.uk


See My Feedback
Reply With Quote
  #2  
Old 25-04-2010
KevLee's Avatar
KevLee KevLee is offline
oOple Advertiser
 
Join Date: Nov 2006
Location: Hitchin, Hertfordshire
Posts: 722
Default

You're going to have to do something pretty special to break one of those! they are solid!

I suppose if they were made a bit weaker Chazz could get the price down as he would be able to order larger batches..
Reply With Quote
  #3  
Old 25-04-2010
chris68nufc chris68nufc is offline
Mad Member
 
Join Date: Nov 2006
Location: Newcastle
Posts: 1,870
Default

Talywain. My wing broke in the warm up lap and didnt jump properly after that, i landed right on the back end of the car and it snapped! Finished the race though and a pretty decent time.
I had a spare but didnt know that they were more expensive than a Ferrari to buy
__________________
Chris Stewart
Team XRAY
Xb4 2018
Xb2 CE
Www.tqmodels.co.uk


See My Feedback
Reply With Quote
  #4  
Old 25-04-2010
Darren Boyle Darren Boyle is offline
oOple Advertiser
 
Join Date: Jan 2008
Location: Watford, Herts
Posts: 4,501
Default

To be fair Chris the circumstances you describe are pretty unique and as Kev has pointed out they are one of the very strongest towers on the market.

The AE carbon ones range from £13/18, Yokomo ones range from £15/22 and the Schumacher ones range from £15/17 per tower but all of them are between half to a third of the size of our rear tower on the Squared, plus our tower is 4mm thick and not 3mm like most other brands (which snap far easier), which does put the cost up hugely by being so much thicker.

The current UK RRP is £22.49, which most of our dealers sell if for (or less), the only time it went up to more was last year when the pound suffered badly with the exchange rates being as low as 1.3 ish against the dollar.

We did look at making it 3mm (like most other brands) but opted for the stonger and thicker 4mm and as a result sell very few at all as spare parts (the 3mm one we looked at was going to be £15.99) but the choice to have strength and have to replace very few (if any at all) in the life of the car ruled out this part ever being made...... (would you prefer to buy several at £15.99 or maybe the very odd one at £22.49?)

As far as being as expensive as a Ferrari....... not too sure they are "that" bad
__________________
ORCA - LC RACING - RUDDOG PRODUCTS - JCONCEPTS - ALPHA PLUS - TEKIN RACING - ULTRAPOWER
AVID R/C - VAMPIRE RACING - EXOTEK RACING - LUNSFORD RACING - X-FACTORY - TUNING HAUS - WTF
AME - RAGE R/C - REVOLUTION DESIGN RACING PRODUCTS - McKUNE DESIGN - TEAM AZARASHI
X-PARTZ - PHAT BODIES - RACERS EDGE - RM2 - DIRT RACING PRODUCTS - DMS INSERTZ
TKR GRAPHICS - BF MATERIALS - BATAN - DMS PARTZ - TEAM AJ
Tel : (01923) 816636
Reply With Quote
  #5  
Old 25-04-2010
Mabuchi_Johnson_Lee Mabuchi_Johnson_Lee is offline
Member
 
Join Date: May 2007
Posts: 55
Default

Quote:
Originally Posted by DMS Racing View Post
To be fair Chris the circumstances you describe are pretty unique and as Kev has pointed out they are one of the very strongest towers on the market.

The AE carbon ones range from £13/18, Yokomo ones range from £15/22 and the Schumacher ones range from £15/17 per tower but all of them are between half to a third of the size of our rear tower on the Squared, plus our tower is 4mm thick and not 3mm like most other brands (which snap far easier), which does put the cost up hugely by being so much thicker.

The current UK RRP is £22.49, which most of our dealers sell if for (or less), the only time it went up to more was last year when the pound suffered badly with the exchange rates being as low as 1.3 ish against the dollar.

We did look at making it 3mm (like most other brands) but opted for the stonger and thicker 4mm and as a result sell very few at all as spare parts (the 3mm one we looked at was going to be £15.99) but the choice to have strength and have to replace very few (if any at all) in the life of the car ruled out this part ever being made...... (would you prefer to buy several at £15.99 or maybe the very odd one at £22.49?)

As far as being as expensive as a Ferrari....... not too sure they are "that" bad
Agreed with DMS, i'm not a good driver and had a few bad landing/crashes upside down, what broken was only the Front Shock Tower never the rear, even the wing can break but the wing mount still survived and was not even bended.

Hope that XFactory can make a front shock tower for it.
Reply With Quote
  #6  
Old 26-04-2010
chris68nufc chris68nufc is offline
Mad Member
 
Join Date: Nov 2006
Location: Newcastle
Posts: 1,870
Default

Hadnt realised that they were as expensive as they are so thats why i posted it, i didnt complain that they werent strong, but just that mine had broke and they were expensive,FACT!

I wanted to find out if anybody used anything else or do people just run the XFactory one?

The Ferrarri bit was a joke,Chill
__________________
Chris Stewart
Team XRAY
Xb4 2018
Xb2 CE
Www.tqmodels.co.uk


See My Feedback
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com